OUR PROJECTS

PROJECT: JARIR VILLAGE 2

Motor Control Centers (MCC) for use in all types of pumping applications. They protect pumping systems by simultaneously providing a new level of diagnostics, energy awareness, and control, as well as by enhancing operator safety. The components in motor control centers (MCC) offer advanced protection, efficiency, and information so that operators can provide more effective predictive maintenance.

PROJECT: INSTALLATION OF R.O. UNITS AND PURIFICATION STATION 6 AT QASSIM

Motor control centers (MCC) are enclosed electrical assemblies, divided into sections with a common power bus, with motor starters, feeder breakers and panel boards. They are used to control the starting and stopping of different process equipment such as pumps, blowers and ventilation fans. There are various types of starters, depending......

PROJECT: INSTALLATION OF R.O. UNITS AND PURIFICATION STATION 6 AT QASSIM

A Motor Control Center (MCC) is major power distribution equipment regularly found in any water/ wastewater treatment plant or, in general, any facility that requires electrical power. MCCs typically handle different types of loads, some of which can be shut down for extended periods.

PROJECT: INSTALLATION OF R.O. UNITS AND PURIFICATION STATION 6 AT QASSIM

Motor Control Center technologies have surfaced that address evolving smart pumping system requirements. They protect pumping systems by simultaneously providing a new level of diagnostics, energy awareness and control, as well as by enhancing operator safety.

AL MOUWASAT HOSPITAL - DAMMAM

Offers a high performance packaging solution for all your motor control needs, providing the advantages you need in your competitive environment. Motor control centers are in modern practice a factory assembly of several motor starters. A motor control center can include variable frequency drives, programmable controllers, and metering and may also be the electrical service entrance for the building.

PROJECT: INSTALLATION OF R.O. UNITS AND PURIFICATION STATION 6 AT QASSIM

An Automatic Transfer Switch (ATS) is a device that transfers a power supply from its primary source automatically to a backup generator when it senses a failure or outage occurring in the primary source until utility power is restored.

AL MOOSA HOSPITAL - NORTH TOWER

A Synchronizing Panel works between two or more different power sources like DG sets to manage power supply. Synchronization helps in making different DG sets behave as a virtual single unit and eliminates subdivision of total load. It helps in transferring load from one unit to another as during service period, so that the unit requiring service can be easily shut off. In this way the critical load...

PROJECT: INSTALLATION OF R.O. UNITS AND PURIFICATION STATION 6 AT QASSIM

Motor Control Centers (MCC) for use in all types of pumping applications. They protect pumping systems by simultaneously providing a new level of diagnostics, energy awareness and control, as well as by enhancing operator safety.

PROJECT: AL MOUWASAT HOSPITAL- DAMMAM

Offers a high-performance packaging solution for all your motor control needs, providing the advantages you need in your competitive environment. It is assembled of one or more enclosed sections having a common power bus and principally containing motor control units. Motor control centers are in modern practice a factory assembly of several motor starters....

PROJECT: AL MOOSA HOSPITAL - NORTH TOWER

With Prisma G you can build just the right switchboard for your customer, sized precisely to fit costs and needs. With this complete, prefabricated and tested system, it’s easy to upgrade your installation and still maintain the performance levels.

PROJECT: AL MOUWASAT HOSPITAL - DAMMAM

The Main Distribution Panel Board is the most essential component of a Power Distribution System. Although the submission of the electrical energy through a Power Distribution System also involves Sub Main Distribution Boards (SMDB's) and Final Distribution Boards, the main distribution panel board holds the most importance.

PROJECT: AL MOOSA HOSPITAL - NORTH TOWER

Blokset solutions combine industry-leading features and designs with Schneider Electric support to make implementation and operation quick and reliable so that you can lower costs and realize a faster return on your investment. A fully functional switchboard with built-in intelligence for energy efficiency, Blokset is a simple and modular solution. It is easy to choose, intuitive to use, cost effective, and simple to install and upgrade.

PROJECT: AMANA JUBAL

A unit substation is a combination of a Transformer and a Low-Voltage panel. These substations are used for effective electrical power distribution in medium voltage to low voltage distribution systems.

PROJECT: LULU HYPER MARKET

Functions as an electricity supplier to Final Distribution Boards which feeds the supply to the end-user. The main distribution panel boards serve as an integral player in this cycle. The individual circuits or consumer points get their electrical energy from main distribution boards which they then transfer to the transformer or an upstream panel.

PROJECT: SITE DEVELOPMENT OF DOWNSTREAMS INDUSTRIES PHASE II - RC 129-C04

Switchracks are custom-engineered and custom-built with the entire assembly pre-wired to customer specifications. They are designed for single-phase and three-phase low voltage power and can be outfitted with motor controls, circuit breakers, panel boards and other components.

PROJECT: KHOBAR DEVELOPMENT

Motor Control Center offers high performance solution for all your motor control needs, providing the advantages you need in your competitive environment. It is assembled of one or more enclosed sections having a common power bus and principally containing motor control units. Motor control centers are in modern practice a factory assembly of several motor starters. A motor control center can include variable frequency drives, programmable controllers, and metering and may also be the electrical service entrance for the building.

PROJECT: AL MOUWASAT HOSPITAL-DAMMAM

Synchronizing Panel is for connecting the local generator to the grid. The incoming generator has to have the same phase sequence, voltage and frequency as the grid. To do this a synchronizing panel is needed, two or more generators are sets may be used parallel in order to share the total load of system. When mains fail all generators start at a time but after some time one will be on & other will be stop as per load. When load....

PROJECT: BOSAIRA

Motor Control Center are specially designed according to the different motor rating and it can be available in automatic or manual operation provisional. A control generally consists of a controller which helps to give digital signals to the MCC panel to start the motor. These includes PLC, VFD, Switches, Transformers and many other necessary components which are must to control the voltage of current for the smooth and hassle free performance of your device.

PROJECT: SITE DEVELOPMENT OF MUTRAFIAH PHASE 1 RC 711-Y01

These product is a Stainless Steel IP65 enclosures constructed for either indoor or outdoor use to provide a degree of protection to personnel against access to hazardous parts. To provide a degree of protection of the equipment inside the enclosure against ingress of solid foreign objects. The entire range of panel is well tested on various parameters before the final delivery. We are offering this product at reasonable price to our valued clients within the committed time period.

PROJECT: STC WAREHOUSE

Provide all the functions of a automatic transfer switch plus the ability to bypass power from a live source to load in the event the transfer switch is disabled. It also allows the transfer switch to be isolated and de-energized for maintenance, testing, or repair while maintaining constant power to the load. It is designed for applications where total system coordination is desired, they offer integral overcurrent protection with an electronic trip unit.

PROJECT: AL MOUWASAT HOSPITAL- DAMMAM

Our Motor Control Centers can be build recommended by our engineers and also can be designed according to customer’s specification. The motor control contains controller which allow the digital signal to MCC panel to start the motors. The components includes VFD, PLC, switches, transformers and other essentials components that are must to control the voltage.

Below is a photos of some projects were EAMFCO has supplied some different kinds of Panel Boards

Contact Us

Submit your inquiry and we will contact you.